|A classically designed hand made 6L6 amplifier with 20 class A watts per channel. Totally designed and hand made in Australia. Using custom wound output transformers wound by us in house. $1195.00|
Shown with optional figured Tasmanian Oak Pliinth (adds $100.00).
Power Output - 20 watts per channel
Frequency response -3db - 10hz to >40khz
Separation - >65db
Signal to Noise - >85db A Weighted
Signal to Hum - > 75db
Distortion - <0.4% at 1 watt rms
Hum Level - <2.0 millivolt
Sensitivity - 500mV
Input impedance - 100K
Speaker output 8 ohm (6 to 10 ohm is fine)
Weight ~16kg (~35lb)
Dimensions 430mm x 320mm x 200mm (width x depth x height)
Can also run KT66, 7581 and 5881 output tubes.
Below are images showing Troubadour with upgraded Tung-sol 6L6 output tubes.